Products

Luminaire Push Button

The UH-UP operators are normally used in the chemical and petrochemical plants, off-shore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present. The UH-UP operators range has been designed to meet the main requirements of power distribution, monitoring and signaling, and other electrical functions inside the hazardous area of the plant.

Unit Price:

Customers can still purchase even if there is no stocks available

Unit Of Measurement (UOM):

Spring-return luminaire push button unit. Bushing ø M32. Supplied complete with LED unit in different voltage and one electrical contacts as listed and as option, with different combinations of contacts NO and NC for a maximum number of four units (see table 1). Available in different colours as side listed.

WPBL Spring-return luminaire push button unit, supplied complete with LED module with different voltage and one electrical contact as listed. Available in different colours as per side table.

Product
Code

ColourContact

WPBL R1

Red 1 NC+ LED 24-240 Vac 24-36 Vdc
WPBL W1 White
1 NC+ LED 24-240 Vac 24-36 Vdc
WPBL G1 Green
1 NC+ LED 24-240 Vac 24-36 Vdc
WPBL Y1 Yellow
1 NC+ LED 24-240 Vac 24-36 Vdc
WPBL B1 Blue
1 NC+ LED 24-240 Vac 24-36 Vdc

Product
Code

ColourContact

WPBL R2

Red
1 NO+ LED 24-240 Vac 24-36 Vdc
WPBL W2 White
1 NO+ LED 24-240 Vac 24-36 Vdc
WPBL G2 Green
1 NO+ LED 24-240 Vac 24-36 Vdc
WPBL Y2 Yellow
1 NO+ LED 24-240 Vac 24-36 Vdc
WPBL B2 Blue
1 NO+ LED 24-240 Vac 24-36 Vdc

Product
Code

ColourContact

UPBL R

Red LED + NC
UPBL W White
LED + NO
UPBL G Green
LED + NO
UPBL O Orange LED + NO
UPBL Y Yellow LED + NO
UPBL B Blue LED + NO

The WH - WP - WA series are normally installed on CSE enclosures series used for the following main applications: • control station and instrument housing

• motor starter unit

• instrument housing

• lighting control panel and fitted with other electrical and/or electronic equipment as per our client specific requirements.

The material used to manufacture the UH-UP operators and WA instruments have been studied to grant the maximum protection against the highly corrosive agents present in these industries:

• the external components (handle, push-button, diffuser, ect.) are made of high-quality antistatic and UV-protected polymers and provided with EPDM sealing to mantain the IP66 level of protection of whole control station;

• the internal Ex d components are made of high quality thermoplastic and are available for standard installation on cover or, as option, on a dedicated mounting rail;

• the larger handles are padlockable in different positions (upon request)

• the LED units for pilot light and luminaire push button are available with two range of voltage as indicated in the ordering table;

• the rated current of Ex switch module is up to 16 Amp. and its mechanical life is 1,000,000 times;

• the high brightness and the electrical life of LED units are granted for a minimum of 100,000 hours;

• the diffuser of pilot lights and luminaire push button units have a special design to grant a high visibility degree in any situation

• the external components are fixed directly on cover with a Ø 30 mm. hubs and a directional anchor point depending by type of installation requested.

certificate number: ATEX & IECEx certificates available TC RU C-IT.AA87.B.00509

marking: `II 2GD Ex d e mb IIC T6 Gb Ex tb IIIC T85°C Db (control stations)

ambient temperature: –55°C +60°C

degree of protection: IP66

conformity: Directive ATEX 2014/34/EU TP TC 012/2011

standards: IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-7 ГОСТ 31610.0 ГОСТ IEC 60079-1 ГОСТ Р МЭК 60079-7 IEC-EN60079-11 IEC-EN 60079-18 IEC-EN60079-31 ГОСТ 31610.11 ГОСТ Р МЭК 60079-18 ГОСТ Р МЭК 60079-31

category: suitable for Zone 1 - 21 (gas) and Zone 2 - 22 (dust)