Products

Control & Terminal Box SS316 (Ex e) CSE-S

The CSE S Ex e enclosures are normally used in the chemical and petrochemical plants, off-shore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.

The CSE S Ex e enclosures range has been designed to meet the main requirements of power distribution, monitoring and signaling, and other electrical functions inside the hazardous area of the plant.

Unit Price:

Customers can still purchase even if there is no stocks available

Unit Of Measurement (UOM):

The materials used to manufacture the CSE S series have been studied to grant the maximum protection against the highly corrosive agents present in these industries:

  • body and cover of stainless steel AISI 316;
  • antiloosening screws on cover of stainless steel AISI 316;
  • gasket on cover of polyuretane or silicone;
  • internal fixing screws of stainless steel

The CSE S are available in three different executions:

  • CSE S: cover is fixed to body by antiloosening screws
  • CSE SD: cover is jointed to body by hinges and locking keys
  • CSE SX: cover is jointed to body by hinges and by antiloosening screws

All systems provide the right pressure on gasket to grant the IP66 protection to the enclosure.

CSE SD and CSE SX can be provided with gland plates on each side wall to facilitate the execution of extra cable entries in case of future necessities.

product
code

overall dimension internal dimensions      mounting detailsfixing dimensionsweight
ABCabcdefgscrewkg
CSE 1010095 100 100 90 97 97 70 - - 60 - 2 x M5 0.7
CSE 1510095 150 100 90 147 97 70 - - 110 - 2 x M5 0.9
CSE 1515095 150 150 90 147 147 70 130 118 110 - 2 x M5 1.2
CSE 2010095 200 100 90 197 97 70 - - 160 - 2 x M5 1.2
CSE 2020095 200 200 90 197 187 70 180 168 160 160 4 x M5 1.9
CSE 3015095 300 150 90 297 147 70 280 118 260 - 2 x M5 2.1
CSE 3020095 300 200 90 257 197 70 280 168 260 160 4 x M5 2.6
CSE 1515125 150 150 120 147 147 100 130 118 110 - 2 x M5 1.4
CSE 2020125 200 200 120 197 197 100 180 168 160 160 4 x M5 2.1
CSE 3015125 300 150 120 297 147 100 280 118 260 - 2 x M5 2.4
CSE 3020125 300 200 120 297 197 100 280 168 260 160 4 x M5 2.9
CSE 3030125 300 300 120 297 297 100 280 268 260 260 4 x M5 3.8
CSE 4020125 400 200 120 397 197 100 380 168 360 160 4 x M5 3.6
CSE 4030155 400 300 150 397 297 130 380 268 360 260 4 x M5 5.2
CSE 4040155 400 400 150 397 397 130 380 368 360 360 4 x M5 6.4
CSE 6040155 600 400 150 597 397 130 580 368 560 360 4 x M5 9.0
CSE 6060205 600 600 200 597 597 180 565 557 550 550 4 x M5 13.5

The CSE S Ex e enclosures are normally used form the following main applications:

  • control stations - emergency call units
  • instrument housings - circuit breakers
  • switches and changeover switches - lighting controls
  • terminal boxes - electrical housing
  • battery containers - panel sockets

The CSE S Ex e enclosures are available in different sizes so to create a large and modular range with different heights.

The CSE S Ex e enclosures, joined together through dedicated flanges, can become a large panel, maintaining the original IP protection.

The CSE S series can be equipped with Ex ed operators (pilot lights, push buttons, switches, etc.) on cover.

The materials used to manufacture the CSE S series have been studied to grant the maximum protection against the highly corrosive agents present in these industries:

  • body and cover of stainless steel AISI 316;
  • antiloosening screws on cover of stainless steel AISI 316;
  • gasket on cover of polyuretane or silicone;
  • internal fixing screws of stainless steel

The CSE S are available in three different executions:

  • CSE S: cover is fixed to body by antiloosening screws
  • CSE SD: cover is jointed to body by hinges and locking keys
  • CSE SX: cover is jointed to body by hinges and by antiloosening screws

All systems provide the right pressure on gasket to grant the IP66 protection to the enclosure.

CSE SD and CSE SX can be provided with gland plates on each side wall to facilite the execution of extra cable entries in case of future necessities.

The CSE S series Ex e enclosures can be completed with the following accessories:

  • internal mounting plate of galvanized steel or stainless steel;
  • mounting brackets of stainless steel with integrated earth connection
  • internal and external earth screws of stainless steel AISI 316;
  • hinges on cover of stainless steel (only for CSE S series)

certificate number: IECEx IMQ 15.0006X      IMQ 15 ATEX 013 X      TC RU C-IT.AA87.B.00509

marking: Ex-proof Logo II 2GD Ex e ia IIC T6/T5 Gb  Ex tb IIIC T85/T100°C Db (terminal boxes)

              Ex-proof Logo II 2GD Ex d e [ia/ib] mb IIC T6/T5/T4 Gb  Ex tb IIIC T85/T100/T135°C Db (control stations)

ambient temperature: –20°C +60°C (polyuretane gasket) –50°C +90°C (silicone gasket)

degree of protection: IP65/66

conformity: Directive ATEX 2014/34/EU  TP TC 012/2011

standards: IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-7 IEC-EN60079-11 IEC-EN 60079-18 IEC-EN60079-31

ГОСТ 31610.0 ГОСТ IEC 60079-1 ГОСТ Р МЭК 60079-7 ГОСТ 31610-11 ГОСТ Р МЭК 60079-18 ГОСТ Р МЭК 60079-31

category: suitable for Zone 1 - 21 (gas) and Zone 2 - 22 (dust)