Products

Wall Socket (Zone 1) SWE

SWE - SWAE - SCE - PE series sockets and plugs are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industries where hazardous atmospheres are potentially present.

Unit Price:

Customers can still purchase even if there is no stocks available

Unit Of Measurement (UOM):

The materials used to manufacture the PLUGS & SOCKETS series have been studied to grant the maximum protection against the highly corrosive agents present in these plants:

  • the body in glass fiber reinforced polyester (GRP), provides a very high mechanical strength together with a good resistance against the UV ray effects;
  • the gasket on cover grants an IP66 protection level ;
  • the internal electrical components are fully sealed so as to prevent any corrosive action that could cause electrical faults;
  • the wall type sockets SWE-SWAE series (all sizes) have two cable entries to allow a loop-in-loop-out installation.
  • all the wall type sockets SWE-SWAE series are equipped, as standard, with one stopping plugs ATEX certified and with an internal brass connecting plate.
  • the wall type SWE - SWAE series and coupler type sockets SCE series can be protected with a padlock to avoid unauthorized connections.

product
code

electrical specificationoverall dimension
AmpereVoltageColourPolesW1W2L1L2L3HKg
SWE316B 16A 200 - 250V blue 3 (2P+E) 103 86 223 156 142 122 1.2
SWE316Y 16A 110 - 130V yellow 3 (2P+E) 103 86 223 156 142 122 1.2
SWE316BN 16A 200 - 250V blue 3 (1P+N+E) 103 86 223 156 142 122 1.2
SWE416R 16A 380 - 415V red 4 (3P+E) 123 106 241 176 163 147 1.2
SWE516R 16A 200 - 250V
380 - 415V
red 5P (3P+N+E) 123 106 241 176 163 147 1.2
SWE432R 32A 380 - 415V red 4 (3P+E) 133 118 294 211 198 162 1.8
SWE532R 32A 200 - 250V
380 - 415V
red 5P (3P+N+E) 133 118 294 211 198 162 1.8
SWE463R 63A 380 - 415V red 4P (3P+E) 201 181 472 371 352 248 8.1
SWE563R 63A 200 - 250V
380 - 415V
red 5P (3P+N+E) 201 181 472 371 352 248 8.1
SWE5125R 125A 200 - 250V
380 - 415V
red 5P (3P+N+E) 249 228 537 431 411 274 13.5

Zone 1 Wall Socket SWE Dimension

The PLUGS - SOCKETS range is used for power supply of control and electrical installations, machineries and other equipment that need to be moved often for operational and/or maintenance reasons. The explosion-proof plugs PE series have been designed to be used, in the safe area, in combination with industrial sockets built in conformity to International Standards IEC60309, so to facilitate the power supply of explosion proof equipment connected also in the safe area (e.g. for maintenance purposes) without the necessity to have a dedicated socket. On the other side, the explosion-proof socket SWE - SWAE and SCE series have been designed to disable the insertion of an industrial plug so as to avoid any risk of supplying power inside a hazardous area to a non-protected electrical equipment.

The materials used to manufacture the PLUGS & SOCKETS series have been studied to grant the maximum protection against the highly corrosive agents present in these plants:

  • the body in glass fiber reinforced polyester (GRP), provides a very high mechanical strength together with a good resistance against the UV ray effects;
  • the gasket on cover grants an IP66 protection level ;
  • the internal electrical components are fully sealed so as to prevent any corrosive action that could cause electrical faults;
  • the wall type sockets SWE-SWAE series (all sizes) have two cable entries to allow a loop-in-loop-out installation.
  • all the wall type sockets SWE-SWAE series are equipped, as standard, with one stopping plugs ATEX certified and with an internal brass connecting plate.
  • the wall type SWE - SWAE series and coupler type sockets SCE series can be protected with a padlock to avoid unauthorized connections.

The plugs and sockets have been provided with a self-cleaning system. An elastic shutter type spring casing has been installed in the inserting sleeve of the socket which ensures low contact resistance and low temperature rise while reducing the inserting and pulling-out force.

16A

certificate number: IECEx CML 17.0091X CML 17 ATEX 1176X

marking: Ex-proof Logo II 2GD Ex db eb II C T5 / T6 Gb Ex tb III C T95°C / T80°C Db

ambient temperature: -40°C +45°C / 55°C

degree of protection: IP65 / 66

conformity: Directive ATEX 2014/34/EU

standards: IEC60079-0 / IEC60079-1 / IEC60079-7 / IEC60079-31

                EN60079-0 / EN60079-1 / EN60079-7 / EN60079-31

category: suitable for Zone 1 - 2 (gas) and Zone 21 - 22 (dust)

rated current: 16A

rated voltage: up to 690V

rated switch capacity: AC3 690V/16A DC1 50V/16A

terminals: 2 x 2.5mm2 (Wall & Coupler Socket) 1 x 2.5mm2 (Plug) 1 x 1mm2 (AUX)

cable entries: 2 x M25x1.5 (Wall Socket). Wall Socket Unit c/w one brass plug

cable diameters: 18~28 mm

32A

certificate number: IECEx CML 17.0093X CML 17 ATEX 1178X

marking: Ex-proof Logo II 2GD Ex db eb II C T5 / T6 Gb Ex tb III C T95°C / T80°C Db

ambient temperature: -40°C +40°C / 55°C

degree of protection: IP65 / 66

conformity: Directive ATEX 2014/34/EU

standards: IEC60079-0 / IEC60079-1 / IEC60079-7 / IEC60079-31

                EN60079-0 / EN60079-1 / EN60079-7 / EN60079-31

category: suitable for Zone 1 - 2 (gas) and Zone 21 - 22 (dust)

rated current: 32A

rated voltage: up to 690V

rated switch capacity: AC3 690V/16A DC1 50V/16A

terminals: 2 x 6mm2 (Wall & Coupler Socket) 1 x 6mm2 (Plug) 1 x 1mm2 (AUX)

cable entries: 2 x M32x1.5 (Wall Socket). Wall Socket Unit c/w one brass plug

cable diameters: 18~28 mm

63A

certificate number: IECEx CML 17.0095X CML 17 ATEX 1180X

marking: Ex-proof Logo II 2GD Ex db eb II C T5 / T6 Gb Ex tb III C T95°C / T80°C Db

ambient temperature: -40°C +40°C / 55°C

degree of protection: IP65

conformity: Directive Directive ATEX 2014/34/EU

standards: IEC60079-0 / IEC60079-1 / IEC60079-7 / IEC60079-31

                EN60079-0 / EN60079-1 / EN60079-7 / EN60079-31

category: suitable for Zone 1 - 2 (gas) and Zone 21 - 22 (dust)

rated current: 63A

rated voltage: up to 690V

rated switch capacity: AC3 690V/63A

terminals: 2 x 16mm2 (Wall Socket) 1 x 16mm2 (Plug) 1 x 2.5mm2 (AUX)

cable entries: 2 x M50x1.5 (Wall Socket). Wall Socket Unit c/w one brass plug

cable diameters: 15~35 mm

125A

certificate number: IECEx CML 17.0095X CML 17 ATEX 1180X

marking: Ex-proof Logo II 2GD Ex db eb II C T5 Gb Ex tb III C T95°C Db

ambient temperature: -40°C +45°C / 55°C

degree of protection: IP65

conformity: Directive ATEX 2014/34/EU

standards: IEC60079-0 / IEC60079-1 / IEC60079-7 / IEC60079-31

                EN60079-0 / EN60079-1 / EN60079-7 / EN60079-31

category: suitable for Zone 1 - 2 (gas) and Zone 21 - 22 (dust)

rated current: 125A (-40°C +45°C) 115A (-40°C + 55°C)

rated voltage: up to 690V

rated switch capacity: AC3 690V/125A

terminals: 2 x 50mm2 (Wall Socket) 1 x 25mm2 (Wall Socket Earthing)

             1 x 50mm2 (Plug) 1 x 25mm2 (Plug Earthing) 2 x 2.5mm2 (AUX)

cable entries: 2 x M63x1.5 (Wall Socket). Wall Socket Unit c/w one brass plug

cable diameters: 20~57 mm