End seal for heating cable in non-hazardous and hazardous locations. Re-enterable. Includes cold-applied heating cable core seal. Requires one pipe strap to be ordered separately.
With LED indicator light, order E-100-L-A
E-100 End Seal Kit
E-150 under insulation end seal
E-06 End seal for BTV and QTVR self-regulating heating cables
E-19 End seal for XTV and KTV self-regulating heating cables
E-50 End seal for VPL powerlimiting heating cables
E-100-A & E-100-L-A: End Seal and Lighted End Seal Kits
The E-100-A and E-100-L-A serve as above-insulation end seal kits for Raychem brand BTV, QTVR, XTV, KTV, or VPL heating cables. They are approved by FM and CSA for use in hazardous locations.
Both the E-100-A and the E-100-L-A are mounted on the pipe and project through the thermal insulation and cladding for ease of maintenance. The E-100-L-A end seal with signal light uses an array of bright LEDs for exceptional visibility and long product life.
These rugged end seals are made from high-performance engineering polymer and resist impact, high temperature, and chemical and UV exposure. The stand allows forup to four inches (100 mm) of thermal insulation. The encapsulated light and boot reliably prevent moisture and dust ingress. The industrial-grade electronics used in the E-100-L-A are encapsulated.
Both the E-100-A and E-100-L-A are re-enterable, allowing easy access for testing. Voltage and continuity checkscan be done by simply unscrewing the E-100-A cap and removing the reusable sealing boot. The E-100-L-A makes maintenance even easier by allowing for visual inspection of heating circuit continuity. The E-100-L-A can be retrofitted into previously installed E-100-A end seals. The light module is replaceable.
The kits contain all the necessary materials for a complete installation except for one pipe strap, which must be ordered separately.
E-150: Low Profile End Seal Kit
The E-150 is a cold-applied low-profile end seal. It is designed for use with the following Raychem brandheating cables: BTV, QTVR, XTV, and KTV. Use the E-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM, CSA, and PTB for use in hazardous locations.
The unique design of the E-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. A spring-loaded grommet makes a first seal to maintain a watertight connection, while the silicone-free, noncuring sealant used in the Raychem sealing boot adds a second seal, providing additional protection.
The rugged construction makes the E-150 resistant to impact and suitable for high-temperature and chemical exposure.
The end seal requires no heat source for installation and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one end termination.
Cold applied mechanical end seal with green LED light module, above insulation for easy access for testing. Requires 1 pipe strap, to be ordered separately. Suitable for use with all Raychem industrial self-regulating or power-limiting heating cables.
E-06, E-19 AND E-50:
These end seal kits are designed for the termination of Raychem’s industrial heating cables.
The E-06 is designed for use with BTV- and QTVR heating cables, the E-19 is designed for use with XTV- and KTV heating cables, and the E-50 is for use with VPL heating cables. All kits are approved for use in hazardous areas.
The end seal kits E-06 and E-19 employ easy to use heatshrinkable tubing with an adhesive, that when heated forms a semi-flexible moisture proof encapsulation.
The end seal kit E-50 employs high temperature heat-shrinkable tubing with a plastic melt liner that when heated forms a semiflexible moisture proof encapsulation.
Due to the low profile design the finished termination can be installed directly on the pipe.
One end seal kit is required for each termination.
|Minimum installation temperature||Minimum ambient temperature||Maximum ambient temperature||Maximum pipe temperature||Maximum operating voltage||Overall height|
|E-100-L-A||–40°C||–40°C||40°C||260°C||120 / 277 Vac||200mm|
|Minimum installation temperature||Minimum usage temperature||Maximum pipe temperature||Maximum operating voltage|
|E-150||–40°C||–50°C||215°C||277 Vac for FM, CSA; 254 Vac for PTB|
|Max. exposure temperature||Maximum current rating||Dielectric strength||Volume resistivity||Final dimensions|
|E-06||175°C||40 A||2.2 MV/m||10^13 Ω cm||length approx. 120 mm|
|E-19||200°C||40 A||> 6 MV/m||10^10 Ω cm||length approx. 135 mm|
|E-50||260°C||40 A||> 40 MV/m||10^18 Ω cm||length approx. 120 mm|
End seal for heating cable in nonhazardous, Zone 1,2 and Division 2 hazardous locations. Re-enterable. Includes cold-applied heating cable core seal. Requires one pipe strap to be ordered separately. Lighted versions for ease of status monitoring are available.
For North America approvals (H56829):
- E-100-L-A (with red indicator light, 100-120 V)
- E-100-L-A(with red indicator light, 200-277 V)
For ATEX Certifications (DOC 2210):
- E-100-L-E(with green indicator light, 200-277 V)
E-150 (North America: H56835); (European: DOC 2210)
Low-profile end seal for heating cable in nonhazardous, Zone 1, 2 and Division 2 hazardous locations. Includes cold-applied heating cable core seal.
Dimensions of E-150