Explosion Proof Coupler Type Socket (Zone 1)

ATEX-Approved Products

SWE - SWAE - SCE - PE series sockets and plugs are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industries where hazardous atmospheres are potentially present.

Unit Price: SGD 871.17

In Stock

Customers can still purchase even if there is no stocks available

Back

Add To Cart

Enquire Now

The materials used to manufacture the PLUGS & SOCKETS series have been studied to grant the maximum protection against the highly corrosive agents present in these plants:

the body in glass fiber reinforced polyester (GRP), provides a very high mechanical strength together with a good resistance against the UV ray effects;
the gasket on cover grants an IP66 protection level ;
the internal electrical components are fully sealed so as to prevent any corrosive action that could cause electrical faults;
the wall type sockets SWE-SWAE series (all sizes) have two cable entries to allow a loop-in-loop-out installation.
all the wall type sockets SWE-SWAE series are equipped, as standard, with one stopping plugs ATEX certified and with an internal brass connecting plate.
the wall type SWE - SWAE series and coupler type sockets SCE series can be protected with a padlock to avoid unauthorized connections.

product code		electrical specification				overall dimension
product code		Ampere	Voltage	Colour	Poles	L1	L2	L3	Kg
	SCE316B	16A	200 - 250V	blue	3 (2P+E)	247	69	72	0.7
	SCE416R	16A	380 - 415V	red	4 (3P+E)	279	90	93	0.7
	SCE516R	16A	200 - 250V 380 - 415V	red	5 (3P+N+E)	279	90	93	0.7
	SCE432B	32A	200 - 250V	blue	4 (3P+E)	333	90	90	1.7
	SCE432R	32A	380 - 415V	red	4 (3P+E)	333	90	90	1.7
	SCE532R	32A	200 - 250V 380 - 415V	red	5 (3P+N+E)	333	90	90	1.7

Zone 1 Coupler SCE Dimension

The PLUGS - SOCKETS range is used for power supply of control and electrical installations, machineries and other equipment that need to be moved often for operational and/or maintenance reasons. The explosion-proof plugs PE series have been designed to be used, in the safe area, in combination with industrial sockets built in conformity to International Standards IEC60309, so to facilitate the power supply of explosion proof equipment connected also in the safe area (e.g. for maintenance purposes) without the necessity to have a dedicated socket. On the other side, the explosion-proof socket SWE - SWAE and SCE series have been designed to disable the insertion of an industrial plug so as to avoid any risk of supplying power inside a hazardous area to a non-protected electrical equipment.

The materials used to manufacture the PLUGS & SOCKETS series have been studied to grant the maximum protection against the highly corrosive agents present in these plants:

the body in glass fiber reinforced polyester (GRP), provides a very high mechanical strength together with a good resistance against the UV ray effects;
the gasket on cover grants an IP66 protection level ;
the internal electrical components are fully sealed so as to prevent any corrosive action that could cause electrical faults;
the wall type sockets SWE-SWAE series (all sizes) have two cable entries to allow a loop-in-loop-out installation.
all the wall type sockets SWE-SWAE series are equipped, as standard, with one stopping plugs ATEX certified and with an internal brass connecting plate.
the wall type SWE - SWAE series and coupler type sockets SCE series can be protected with a padlock to avoid unauthorized connections.

The plugs and sockets have been provided with a self-cleaning system. An elastic shutter type spring casing has been installed in the inserting sleeve of the socket which ensures low contact resistance and low temperature rise while reducing the inserting and pulling-out force.

16A

certificate number: IECEx CML 17.0091X CML 17 ATEX 1176X

marking: II 2GD Ex db eb II C T5 / T6 Gb Ex tb III C T95°C / T80°C Db

ambient temperature: -40°C +45°C / 55°C

degree of protection: IP65 / 66

conformity: Directive ATEX 2014/34/EU

standards: IEC60079-0 / IEC60079-1 / IEC60079-7 / IEC60079-31

EN60079-0 / EN60079-1 / EN60079-7 / EN60079-31

category: suitable for Zone 1 - 2 (gas) and Zone 21 - 22 (dust)

rated current: 16A

rated voltage: up to 690V

rated switch capacity: AC3 690V/16A DC1 50V/16A

terminals: 2 x 2.5mm²(Wall & Coupler Socket) 1 x 2.5mm² (Plug) 1 x 1mm² (AUX)

cable entries: 2 x M25x1.5 (Wall Socket). Wall Socket Unit c/w one brass plug

cable diameters: 18~28 mm

32A

certificate number: IECEx CML 17.0093X CML 17 ATEX 1178X

marking: II 2GD Ex db eb II C T5 / T6 Gb Ex tb III C T95°C / T80°C Db

ambient temperature: -40°C +40°C / 55°C