The three-piece unions are normally used in the chemical and pretrochemical plants, off-shore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.
BMF - RMF series:
male - female three-piece unions
|
Product | ||||||
|---|---|---|---|---|---|---|
| Ø NPT | Ø Metric | H | CH 1 | CH 2 | ||
 |
BMF 1 | 1/2” | M20 x 1.5 | 62 | 34 | 30 |
| BMF 2 | 3/4” | M25 x 1.5 | 63 | 40 | 36 | |
| BMF 3 | 1” | M32 x 1.5 | 70 | 50 | 45 | |
| BMF 4 | 1” 1/4 | M40x 1.5 | 70 | 60 | 55 | |
| BMF 5 | 1” 1/2 | M50 x 1.5 | 82 | 72 | 65 | |
| BMF 6 | 2” | M63 x 1.5 | 86 | 83 | 76 | |
| BMF 7 | 2” 1/2 | M75 x 1.5 | 97 | 110 | 100 | |
| BMF 8 | 3” | M90 x 1.5 | 100 | 122 | 108 | |
| BMF 10 | 4” | M110 x 1.5 | 110 | - | - | |
|
Product | ||||||
|---|---|---|---|---|---|---|
| Ø NPT | Ø Metric | H | CH 1 | CH 2 | ||
|
RMF 1 | 1/2” | M20 x 1.5 | 75 | 34 | 30 |
| RMF 2 | 3/4” | M25 x 1.5 | 76 | 40 | 36 | |
| RMF 3 | 1” | M32 x 1.5 | 83 | 50 | 45 | |
| RMF 4 | 1” 1/4 | M40x 1.5 | 83 | 60 | 55 | |
| RMF 5 | 1” 1/2 | M50 x 1.5 | 95 | 72 | 65 | |
| RMF 6 | 2” | M63 x 1.5 | 99 | 83 | 76 | |
| RMF 7 | 2” 1/2 | M75 x 1.5 | 110 | 110 | 100 | |
| RMF 8 | 3” | M90 x 1.5 | 113 | 122 | 108 | |
| RMF 10 | 4” | M110 x 1.5 | 123 | - | - | |
The three-piece unions are designed to allow the connection between conduit equipment and enclosures thanks to the independent rotation of their ends, available with a male or female threads. The three-piece unions are available in the following configurations:
- male - female: BMF (IIB gas group) and RMF (IIC gas group)
The materials used to manufacture the cable glands have been studied to grant the maximum protection against the highly corrosive agents present in these industries.
They are available in:
• galvanized steel
• stainless steel AISI 316
The O-ring and internal gaskets are made of EPDM (-20°c / +80°C) and, for low and high temperature environment, of silicone (-45°C / +125°C).
The three-piece unions are available, as standard, with NPT or Metric threads. Other thread types can be
available upon request.
certificate number: IECEX IMQ 16.0010X IMQ 16 ATEX 007 U TC RU C-IT.AA87.B.00509
marking: ` II 2GD Ex d IIB Gb - Ex d IIC Gb - Ex tb IIIC Db ` II 2GD Ex d e [ia/ib] mb IIC T6-T5-T4 Gb Ex tb IIIC T85-100-135°C Db (станции управления)
ambient temperature: -45°C +125°C (silicone gasket) -20°C +80°C (EPDM gasket)
degree of protection: IP66 / IP68
conformity: Directive ATEX 2014/34/EU TP TC 012/2011
standards: IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31 ГОСТ 31610.0 ГОСТ IEC 60079-1 ГОСТ Р МЭК 60079-31
category: suitable for Zone 1 - 21 (gas) and Zone 2 - 22 (dust)
