The JBM-100 kit serves as a power connection, splice, or tee for up to three Raychem brand BTV, QTVR, XTV, KTV, or VPL heating cables. It is approved by FM, CSA, PTB and IEx for use in hazardous locations.
The JBM-100 integrates the functions of connection kits and insulation entries. The rugged stand protects the heating cable and allows for up to four inches (100 mm) of thermal insulation.
The cold-applied core sealer does not require a heat gun or torch for installation, so no hot work permit is necessary. The silicone-free, noncuring sealant allows easy installation and re-entry for maintenance.
Innovative spring clamp terminals provide fast installation and safe, reliable, maintenance-free operation.
Compared with other systems, this connection kit significantly reduces installation time. The kit is offered in three versions, customized for local installation practices. All kits are also available with a plug-in LED light (-L) that indicates when power is supplied to the heating cable circuit.
The kit contains all the necessary materials for a complete installation except for the pipe straps, which must be ordered separately.
JBM-100-A, A6 JBM-100-L-A: This kit has a junction box with one through hole. The kit includes one stopping plug.
JBM-100-EJBM-100-L-E: This kit has a junction box with two M25 threaded entries, one stopping plug and one plastic power cable gland.
JBM-100-EPJBM-100-L-EP: This kit has a junction box with two M25 threaded entries, an earthing plate and an external earthing stud. It is designed for use with armored power cables.
Multiple-entry power connection for up to three heating cables. Can also be used as a splice or tee connection. For use in non-hazardous and hazardous locations. Includes cold-applied heating cable core seal. Requires two pipe straps to be ordered separately.
With LED indicator light, order JBM-100-L-E.
|Minimum Installation temperature||Minimum Ambient Temperature||Maximum Ambient Temperature*||Maximum Pipe Temperature||Maximum conductor size||Maximum operating voltage||Maximum circuit breaker rating|
|JBM-100-A, A6||-40°C||–60°C||56°C||260°C||8 AWG (A6 to 6 AWG)||480 Vac||50 A|
|JBM-100-E||-40°C||–50°C||56°C||260°C||10 mm2||480 Vac||40 A|
|JBM-100-EP||-40°C||–50°C||56°C||260°C||10 mm2||480 Vac||40 A|